VERY HIGH PERFORMANCE & STRONG CEMENTITIOUS ADHESIVE FOR ANY KIND OF TILES
PC 400 is a hi-tech single part adhesive with superior levels of adhesion and deformability. It is a high performance dry set adhesive for use with water or latex for installing ceramic tiles, marble ,stone, any kind of non porous or vitreous tiles or synthetic stone. Use with PC SBR LATEX for high performance for interior and exterior Laying and Over Laying of sites.
It has a special function that works specifically to counter conditions such as external pressures on cladding tiles of the skyscrapers and large format tiles with overlaying on existing floors. It is a secure professional method of laying for it has high deformability up to IO mm thickness.
- Very good for large format paving slabs
- Fixing absorbent floor and wall tiles outdoors and indoors. The tiles can be made of cotta, double fired, single fired ceramic
- Fixing poorly absorbent or non-absorbent materials such as single-fired tiles, split tiles, refine porcelain stoneware and vitrified tiles
- Suitable for fixing tiles : on top of old ceramic tiles or on Facades
- Fixing natural stone and marble, so long as they are not affected by water
- Spot-gluing insulating panels made of polystyrene, polyurethane foam, rock or glass wool
- Fixing on heating floors
- Cement Mortar Based
- Cement Terrajo
- Cement Plaster
- Old Ceramic Floors
- Brick Masonry
- Old Natural Stone
| Colours | Grey & White |
| Mixing Ration | 7.2 trs / 20Kg Pinnacle bag |
| Coverage | Approximately 60 Sq. ft for 20 Kgs. Bag with 6mm X 6mm Square notch trowel for a bed thickness of 3 mm |
| Pot Life | > 4hr |
| Shelf life | 12 month with original packing in dry storage place |
| Opentime | > 30 minutes |
| Adjustabil ity | > 45minutes |
| Bed Thickness | 3mmto 10mm |
| Grouting | 8hr on wall / 24hr on floor |
| Shear Adhesion after 28 days | > 2.5 Mpa | ANSIA-118.1 |
| Tensile adhesion on concrete after 28 days Durability test: | > 2.5 Mpa | EN 1348 |
| Adhesion after heat ageing | > 2.5 Mpa | ENl348 |
| Adhesion after water immersion | > I Mpa | ENl348 |
| Adhesion after freeze thaw cycles | > I Mpa | ENl348 |
| Adhesion after straining cycles | > I Mpa | ENI348 |
| Working temperature | from -30°C to 80°C | |
| Conformity | C2 TE | ENl2004 |
PACKING DETAIL: 20 KG. BAG