AAC Block Adhesive
PC BLOCK FIX Adhesive is a versatile thin jointing material for laying AAC blocks, fly ash bricks, concrete blocks etc. The Product is specially designed to provide higher bonding as result of higher tensile adhesion strength. PC Block Fix ADHESIVE is pre-mixed, easy to apply high quality mortar comprising of cement, graded sand and admixtures. PC Block Fix Adhesive replaces conventional jointing mortar of 12-18 mm thickness with highly versatile 3-5 mm thickness.
PC BLOCK FIX ADHESIVE helps to speed up the build process and achieve the required insulation performance of AAC Blocks for the buildings, PC Block Fix Adhesive (thin joint masonry) is a fast, clean, accurate system for construction using autoclaved aerated concrete blocks of close dimensional tolerance with 2 mm – 3mm mortar joints.
- Thin Jointing Material with very high adhesion strength
- Pre-mixed and ready-to-use. Only water is to be mixed at size
- Economical. Eliminates lengthy and cumbersome processes of site mixing,
- thus transport and storage of all individual materials is avoided
- Easy to mix and much Faster application
- Thin layer application results in structure being compact
- No Water curing is required after application
- Minimizes the undulation of the surface
- Being a thin layer, chances of water percolation is negligible
- Being premixed, it saves considerable time and labour
- Ready for subsequent application like plastering just after 24 hours of application
- Eco-friendly product
- Raw materials are processed, reducing the chances of efflorescence
- Laying and jointing of fly ash bricks, cement blocks, hollow blocks, AAC blocks etc.
- Jointing of pre-stressed concrete slabs, panels.
- Parapet walls
- Jointing of cement window and door frames.
- Garden and boundary walls
- Under normal conditions the coverage of is approx. 11.15 sq. mtr. with average thicknes of 3mm for a bag of 40 kgs. the coverage area however will depend upon the quality of the substrate and thickness of the material used.
- For best results, proper tools for mixing and application is advised which will result in higher coverage, savings in time and manpower.
- PC block x Adhesive should be stored in a dry place. shelf life is 6 months.
| Appearance | Free Flowing Powder | PC BOND Lab |
| Color | Grey | PC BOND Lab |
| Water Demand | 25 to 30 % | PC BOND Lab |
| Open Time | 30 Min. | PC BOND Lab |
| Adjustibility | 45 Min. | PC BOND Lab |
| Hard Dry | 24 Hours. | PC BOND Lab |
| Self Curing | Yes (No additional water curing is required) |
PC BOND Lab |